Salary:40-70k · 14 salary
Experience requirements:5-10 years
Educational requirements:PhD
Job Description:
Job Responsibilities:
1. Responsible for passive safety system research and system solution design, as well as conducting research on cutting-edge technologies in the industry
2. Responsible for research related to passive safety systems, such as human biomechanics
Job requirements:
1. I have research experience in passive safety systems and human biomechanics
2. Graduate degree or above, more than 3 years of work experience in a host factory or collision testing institution, with simulation ability
Priority should be given to obtaining a PhD

Salary: 30-35k
Experience requirements: Unlimited experience
Educational requirements:PhD
Job Description:
Job Responsibilities:
1. Standardization of special processes, through the study of robot application processes, quantifying relevant parameters and studying the impact of each parameter on the process, in order to standardize the debugging parameters in various states and achieve simple, fast, and stable debugging of complex processes;
2. Improve the operational accuracy of robots and perform position motion compensation, as well as develop autonomous robotic arms;
3. By analyzing and studying the data generated by production line equipment and products, and analyzing the correlation and guiding information of the data, the surrounding environment affected by the data can be evaluated to achieve equipment warning, deviation plan analysis, etc;
4. Deeply develop and customize the systems of existing brand robots and later developed equipment
Job requirements:
1. PhD degree, preferred in fields such as mechanical kinematics, artificial intelligence, applied mathematics, statistics, intelligent manufacturing, control engineering, etc
2. Proficient in using relevant office software, with good communication and expression skills, and clear logical thinking

Salary: 29-50k
Experience requirements: Unlimited experience
Educational requirements:PhD
Job Description:
Job Title: Doctoral Recruitment
Job Description: Electrical Control Hardware, High Voltage Technical Support, Product Analysis, Electrical Control Development, Charging Systems, Power Distribution Connections, Power Systems, High Voltage Safety, EMC, Project Management, High Voltage Big Data Development, Thermal Management Pre Research, Thermal Management Performance Simulation, Algorithms, CFD, NVH, High Resolution Materials, Anti Corrosion, Institutional Research and Development, CAE Simulation, BMS, Battery Safety PACK Electrical/Reliability/Structure, Battery Thermal Management, Thermal System Development, Cell Applications, System Architecture, Performance Integration, Simulation, Thermal Energy Management, Energy Flow Simulation, New Technology Research, Electronic Control, System, Strategy, Vehicle System Testing, Vehicle Control Strategy, Software, Calibration, Basic Software, Human Thermal Comfort, Engine System, Engine Simulation, Performance Development, Matching Calibration, Software Development, Electrical Appliances, Braking System, Steering Function Safety, Tire Dynamics, Chassis Control Algorithm, Vehicle Dynamics, New Technology Research, Transmission System, Electric Drive System, etc Required majors: Electrical Engineering, Mechanical Engineering, Electronic Information, Communication Engineering, Electronic Science and Technology, Refrigeration and Low Temperature Engineering, Vehicle Engineering, Fluid Mechanics and Heat Transfer, Biomedical Engineering, Power Engineering and Engineering Thermophysics, Control Science and Engineering, Thermal Energy and Power Engineering, Fluid Machinery and Engineering, Electrical and Electrical, Electrical Engineering and Automation, Power Electronics, Acoustics, Electrical Engineering, Polymer Materials and Engineering, Materials Science, Materials Physics and Chemistry, Corrosion Science and Protection, Metal Corrosion and Protection, Electrochemistry, Mechanical Manufacturing and Automation, Solid Mechanics, Automotive Engineering, Mechanical Engineering, Electronic and Communication Engineering, Communication and Information Theory, Computer Science and Technology, Software Engineering, Engineering Mechanics, Physics, Materials Physics and Chemistry, Materials Science and Engineering. The sentence is: High voltage and insulation technology, mechatronics, mathematics, systems engineering, intelligent design, knowledge engineering, modern design theory, artificial intelligence, software engineering, automation, physiology, ventilation and air conditioning engineering Work location: Shenzhen

Salary: 30-60k
Experience requirements:1-5 years
Educational requirements:PhD
Job Description:
1. Mechanism research work of the coordination and planning departments
2. Conduct in-depth failure analysis research on specific cases
3. Build an FTA analysis tree, summarize and generalize the failure database and related information
4. More than 1 year of relevant work experience
5. Master the research and preparation of positive/negative/electrolyte materials for sodium/lithium batteries, as well as the analysis and characterization of positive/negative/electrolyte materials for lithium/sodium batteries

Salary: 30-35k
Experience requirements: Unlimited experience
Educational requirements:PhD
Job Description:
Job Responsibilities:
1. Develop and promote new products and processes according to the company's product plan, and collaborate to solve key technologies in material and product design and development;
2. Familiarize oneself with the development trends of commonly used metal products and technologies, conduct technical research based on development needs, and establish metal material selection standards and evaluate metal selection schemes in combination with practical applications;
3. Responsible for collecting and organizing scientific and technological literature, industry standards, and industry information in relevant fields;
4. Responsible for the main work related to material problem analysis, project design, scheme certification, organizational implementation, data analysis, and summary in this major;
5. Development of materials and product processes, preparation of technical documents, writing of technical reports or patents;
6. Complete other tasks assigned by superiors


Job requirements:
1. Doctoral degree, preferably in metal materials, metal surface treatment or related majors;
2. Possess solid professional knowledge in metal materials, including knowledge and abilities in heat treatment, metallographic analysis, failure analysis, etc;
3. Familiar with surface treatment processes for metal materials, including requirements for bluing, blackening, and PTFE treatment;
4. Familiar with the basic performance testing and analysis methods of metal materials, understand the preparation and processing technology of materials and conventional surface treatment methods;
5. Have good logical analysis and problem-solving skills, and be proactive in work

Salary: 40-60k
Experience requirements: Unlimited experience
Educational requirements:PhD
Job Description:
Job Responsibilities:
1. Responsible for researching the welding process mechanism of batteries and new welding processes in the industry
2. Responsible for the welding process of new structures and models of batteries in the pilot test, including handling welding abnormalities and developing process documents

Salary: 30-50k
Experience requirements: Unlimited experience
Educational requirements:PhD
Job Description:
Priority will be given to those with the following relevant professional backgrounds:
1. Material processing direction: Metal deformation processing technology, involving plastic deformation theory, material forming technology, microstructure and performance evolution during deformation process, etc
2. Metal liquid forming direction: including but not limited to casting technology, optimization of alloy material properties, analysis of liquid metal flow and solidification behavior, etc
3. The direction of metal surface treatment includes but is not limited to coating technology, surface modification, and exploration of new surface treatment materials. By optimizing treatment processes, the corrosion resistance, wear resistance, decorative properties, and other properties of metal surfaces can be improved

Job Responsibilities:
1. Responsible for researching the mechanism of metal corrosion
2. Competitor sample analysis and summary
3. Project planning, experimental design, sample validation and testing
4. Collaboration with foreign universities, research institutes, etc., project application, planning, establishment, and evaluation
5. Summary of project stage achievements and writing of papers and patent disclosure documents

Salary: 29-55k
Experience requirements: Unlimited experience
Educational requirements:PhD
Job Description:
Job Description:
1. Responsible for the development of battery materials and new battery materials, applying various advantageous technologies accumulated by the team to the battery system, and preparing sample batteries with market competitiveness
2. Responsible for electrode reaction kinetics research, interface electrochemical reaction research, technical research on battery cell failure issues, understanding industry research trends, developing new electrochemical research methods and promoting their applications 3. Lead the design and development of new battery products, responsible for the formulation and evaluation of new product design schemes and verification plans; Participate in specialized discussions and solutions to technical issues related to system development and battery development processes 4. Future technology planning and patent layout of cutting-edge technologies




Job requirements:
1. PhD students (overseas returnees are preferred), those engaged in research directions such as battery materials, electrochemistry, battery structure, physical chemistry, etc. are preferred 2. Accumulate certain research achievements in the research field and have the ability to innovate and solve problems 3. Good communication and clear logic

Salary: 25-35k
Experience requirements: Unlimited experience
Educational requirements:PhD
Job Description:
Corporate culture: "Learn from others, catch up with others, and surpass others"

Company Talent Philosophy: BYD adheres to a people-oriented human resources policy, respects, cultivates, and treats people well, and establishes a fair, just, and open working and development environment for employees
Company talent values: competition, humility, hard work, and eagerness to learn


Job Responsibilities:

1. Responsible for researching the mechanism of metal corrosion

2. Competitor sample analysis and summary

3. Project planning, experimental design, sample validation and testing

4. Collaboration with foreign universities, research institutes, etc., project application, planning, establishment, and evaluation

5. Summary of project stage achievements and writing of papers and patent disclosure documents

Job requirements:

1. Doctoral degree or above

2. Materials Science and Engineering, Materials Processing Engineering, Corrosion and Protection, or related majors in Materials Science and Chemistry, with directions in Materials Processing, Metal Liquid Forming, Metal Surface Treatment, etc

Salary: 20-35k
Experience requirements: Unlimited experience
Educational requirements:PhD
Job Description:
Job Responsibilities:
1. Responsible for product acoustic design, development process, and software and hardware architecture
2. Track the latest audio development technologies, convert them into usable commercial algorithms, and optimize them
3. Responsible for the development of audio hardware, circuit design, and debugging
4. Develop an acoustic testing plan to debug and optimize the parameters of the product
5. Write technical documents and patents

Qualifications:
1. Possess a solid foundation in acoustics and knowledge of audio signal processing, able to guide the design and process development of audio products
2. Possess excellent algorithm design and software implementation skills, familiar with Matlab/C++
3. Have a solid hardware foundation and experience in developing and debugging ARM/MCU/DSP, etc
4. Have rich experience in product sound analysis, debugging, and sound quality improvement
5. Have project experience in signal processing, audio development, etc.

Salary: 30-40k
Experience requirements: Unlimited experience
Educational requirements:PhD
Job Description:
From campus to workplace, from students to technical experts, BYD will provide you with a new development platform. This place is full of vitality and vigor, containing opportunities and challenges. It will witness your transformation and become a new starting point for your career. You will set sail from the tide of new energy and find your own star sea! Come and join us



Job Responsibilities:
Product sealing protection reliability design, failure mechanism analysis, and failure model construction. Develop sealing schemes for different sealing levels, define sealing material performance, establish design standards and specifications for sealing coordination, and build sealing failure models and evaluation standards for sealing surface roughness, friction damage, lubrication, thermal aging, and sealing deformation

Requirement:
1. Research fields related to mechanical engineering, materials, etc
2. Research and practice related to fluid sealing
3. Possess good English literature reading and writing skills
4. Ability to independently carry out scientific research work
5. Possess team spirit, sense of responsibility, diligent and down-to-earth work, good communication and learning abilities

Salary: 30-35k
Experience requirements: Unlimited experience
Educational requirements:PhD
Job Description:
Job Responsibilities:

1. Analyze and establish effective models for material flow, stress concentration, and release in metal material forming

2. Establish CAE simulation strategies for different forming processes and apply them to similar products, compare the accuracy capabilities of different metal material forming processes, and identify the optimal forming process

3. Build a lightweight material forming model library and incubate new products based on different material line schemes

4. Welding technology, simulation, welding structure and stress analysis, control, and intelligent integrated factory design for different materials

Job requirements:

1. Doctoral degree is preferred, with majors in mechanical engineering, material forming, metal materials, intelligent manufacturing, and other related fields

2. Having solid professional knowledge, with research directions involving aluminum or steel material conversion products, etc

3. Proficient in using relevant office software, with good communication and expression skills, and clear logical thinking

Salary: 30-40k
Experience requirements: Unlimited experience
Educational requirements:PhD
Job Description:
From campus to workplace, from students to technical experts, BYD will provide you with a new development platform. This place is full of vitality and vigor, containing opportunities and challenges. It will witness your transformation and become a new starting point for your career. You will set sail from the tide of new energy and find your own star sea! Come and join us



Job Responsibilities:
Electrical contact reliability design, failure mechanism analysis, and failure model construction. Establish requirement specifications for electrical contact area and positive pressure, establish a lifespan model and evaluation criteria for chemical factors such as electrical contact oxidation and corrosion, and establish evaluation criteria for micro motion friction, stress relaxation, and creep mechanism research


Requirement:
1. Research fields related to electrical engineering, physics, etc
2. Possess research and practice related to electrical contacts, electrical life machines, etc
3. Possess good English literature reading and writing skills
4. Ability to independently carry out scientific research work
5. Possess team spirit, sense of responsibility, diligent and down-to-earth work, good communication and learning abilities

Salary: 30-40k
Experience requirements: Unlimited experience
Educational requirements:PhD
Job Description:
From campus to workplace, from students to technical experts, BYD will provide you with a new development platform. This place is full of vitality and vigor, containing opportunities and challenges. It will witness your transformation and become a new starting point for your career. You will set sail from the tide of new energy and find your own star sea! Come and join us



Job Responsibilities:
1. Research on power module packaging technology for electric vehicles
2. Research the latest academic and technological trends in the electronic packaging industry, analyze and transform them into predictions of technological trends, and guide engineers in conducting technical research and implementing engineering applications 3. Responsible for benchmarking analysis of products from world-class semiconductor manufacturers, and developing device specification parameters based on high-voltage product requirements 4. Responsible for building and cultivating the power device technology team, and guiding related work


Requirement:
1. Familiar with the power semiconductor industry chain for new energy vehicles, familiar with device design, device characteristics, manufacturing processes, packaging and testing procedures, reliability, and applications
2. Familiar with electronic components, power devices, packaging technology, and material characteristics for new energy vehicles
3. Overseas project experience is preferred
4. Good communication and interpersonal skills, English expression ability, diligent in thinking and adept at research, possessing excellent teamwork spirit and rigorous work attitude

Salary: 30-40k
Experience requirements: Unlimited experience
Educational requirements:PhD
Job Description:
Corporate culture: "Compete to learn and help win"

Company Talent Philosophy: BYD adheres to a people-oriented human resources policy, respects, cultivates, and treats people well, and establishes a fair, just, and open working and development environment for employees
Company talent values: competition, humility, hard work, and eagerness to learn


Job Responsibilities:

1. Responsible for researching the mechanism of metal corrosion

2. Competitor sample analysis and summary

3. Project planning, experimental design, sample validation and testing

4. Collaboration with foreign universities, research institutes, etc., project application, planning, establishment, and evaluation

5. Summary of project stage achievements and writing of papers and patent disclosure documents

Job requirements:

1. Doctoral degree or above

2. Materials Science and Engineering, Materials Processing Engineering, Corrosion and Protection, or related majors in Materials Science and Chemistry, with directions in Materials Processing, Metal Liquid Forming, Metal Surface Treatment, etc

Salary: 35-65k
Experience requirements:3-5 years
Educational requirements:PhD
Job Description:
Job Information:
1. Research and development of fluxes, alloys, and solder pastes in the field of surface mount technology, as well as experts in the field of metal materials
2. Responsible for liaising with suppliers, developing and improving the product formula for solder paste projects, evaluating and testing raw materials
3. Responsible for analyzing and resolving process and reliability issues that arise during the trial production of new solder paste applications
4. Lead the establishment of relevant standards and process systems for the selection, testing, research and development, and application of solder paste and electronic materials

Job requirements:
1. Master's degree or above, major in chemistry or related fields, PhD preferred
2. More than 3 years of experience in solder paste product development
3. Good English listening, speaking, reading, and writing skills
4. Strong judgment, analysis, and problem-solving skills, as well as good communication and teamwork abilities
5. Work meticulously and rigorously, with strong professional ethics

Salary: 27-40k
Experience requirements:3-5 years
Educational requirements:PhD
Job Description:
Position and Direction
1. Majors related to automation, computer science, mechanics, mechatronics, electrical engineering, etc; 2. I have led and participated in development projects related to chassis domain control, electronic braking, electronic steering, and electronic suspension. I have a solid professional foundation, am willing to study, and have a strong interest in the development of chassis electronic control technology

Work
1. Responsible for assisting project leaders in the development and design of motion control products, tracking and implementing project work; 2. Responsible for the development, simulation verification, and performance optimization of the vehicle motion control platform system; 3. Responsible for the strategy development and simulation verification of the vehicle motion control platform; 4. Responsible for the development, debugging, and validation of the vehicle motion control platform software, coordinating resources from all parties for product debugging and testing; 5. Lead and participate in the writing of corresponding project documents, including system architecture, stakeholder requirements, software design specifications, review reports, DFEMA analysis, stage summaries, etc

Salary: 35-45k
Experience requirements: Unlimited experience
Educational requirements:PhD
Job Description:
Corporate culture of the company: "Compete to learn and help win"
• Company Talent Philosophy: BYD adheres to a people-oriented human resources policy, respects, cultivates, and treats people well, and establishes a fair, just, and open working and development environment for employees
• Company talent values: competition, humility, hard work, and eagerness to learn

Job Responsibilities:
1. Responsible for the design and development of frame welding processes
2. Responsible for feasibility review of product design process and scheme optimization (welding simulation)
3. Responsible for technological innovation and implementation of research and development projects
4. Responsible for the development and introduction of new processes and technologies
5. Responsible for basic process research and leading welding process validation
6. Responsible for departmental process guidance and training
7. Responsible for handling difficult welding process issues in the factory
8. Responsible for formulating process standards and editing them in a standardized manner

Job requirements:
1. PhD degree, major in Welding Technology and Engineering
2. Proficient in the study of welding mechanism analysis and process improvement measures in the manufacturing of metal materials
3. Have good communication and writing skills, innovative thinking, and teamwork spirit 4. Experience in welding related research in the automotive industry is preferred

Salary: 30-60k
Experience requirements: Unlimited experience
Educational requirements:PhD
Job Description:
Job Responsibilities:
Responsible for controlling the dimensions from design to installation and adjustment during the development process of precision equipment, ultimately ensuring that the equipment functions are complete and the layout is reasonable. The specific content includes but is not limited to the following:
1. Analysis, disassembly, and allocation of overall systematic indicators
2. Control the dimensional tolerances of design drawings and provide specific indicators based on decomposition
3. Analysis of the detection capability and control of indicators for the installation and adjustment test photos
4. Construction of a systematic size analysis platform
5. Communicate and coordinate with other teams, organize requirements and provide quick feedback
6. Participate as a technical expert in the development of technical document specifications and technical reviews
Job requirements:
1. Doctoral degree, major in mechanical engineering, and years of experience in developing precision equipment or instruments can relax the educational requirements
2. Proficient in using mechanical design tools such as 3D drawing, MATLAB, simulation tools, etc
3. Familiar with dimensional chain and tolerance analysis GD&T, with systematic analysis experience
4. Understand different types of processing techniques, such as welding, machining, casting, etc., and have on-site supplier evaluation experience
5. Familiar with the options and usage of some standard components, with practical experience in installation, debugging, and testing
6. Teamwork and communication coordination skills, strong analytical and innovative abilities, good professional ethics, and the ability to actively promote the rapid progress of projects

Salary: 30-50k
Experience requirements:1-3 years
Educational requirements:PhD
Job Description:
1. Main responsibility: Responsible for the development and mechanism analysis of adhesive/diaphragm/electrolyte materials, and developing solutions to meet platform requirements
2. Responsibilities: Responsible for developing Roadmaps, new material development, material technology support, establishing control technology standards, patent planning and layout, communication with suppliers, and technical cooperation
3. Participation: Conduct small-scale and pilot evaluations of material changes, and complete ECN applications; Part number application, PLM system maintenance
4. Assistance: Assist in completing regular audits of positive electrode suppliers with resources and quality

Job requirements:
1. Education and major: Doctoral degree; Majors related to electrochemistry and materials
2. Knowledge and skills: prioritize the development of adhesives, separators, and electrolytes
3. Work experience: Over 2 years of work experience in material and battery factories
4. Professional ethics: responsible and team spirit, excellent communication and collaboration skills, strong research spirit, hardworking and persevering